What details should be paid attention to before paving the badminton plastic floor?

There is a popular saying in the decoration industry: 30% quality and 70% construction. When installing plastic flooring, the construction quality is also very important. Some relatively detailed issues can often reflect the level of construction and also affect the overall installation effect of plastic flooring:

1. Determine the purchase quantity based on the laying space

If you are doing the construction yourself and have no experience, it is recommended that you calculate the construction area before laying, and then calculate the usage. It is recommended to order 2%-5% more square meters to account for loss. Because the plastic floor itself is relatively heavy, if you resend it later, it will increase a lot of logistics costs in vain.

2. The ground must be flat when laying

When laying, you must pay attention to make sure the ground is clean and flat. If the original ground is uneven, you need to level the ground before construction, otherwise there will be ups and downs with the ground, and even cause defects in the future. In addition, cement cannot be laid directly without the polishing process, so you must pay special attention to this.

3. Use a blade to cut the style

It is quite easy to cut the plastic floor. You only need a utility knife to draw from the front and then gently fold it in half to cut it. If you encounter a foot column or a cylinder, it is recommended to cut out a suitable pattern with thick cardboard first, then place the thick cardboard on the plastic floor and trim it accordingly. The overall collage will be more beautiful.

4. Set the right seams

If the plastic floor is not welded, it is suitable to leave a seam of about 1 mm. If it is determined to be welded, no seam is required during paving. Before welding, special grooves are made for placing welding wires. A seam of about 5 mm must be left between the plastic floor and the wall, which can effectively avoid the problem of bulging of the floor in the later stage.

5. If the glue overflows, you can wipe it with rosin water or stain remover.

If you find that there is "glue overflow" in some areas after the floor is installed, it is recommended to use a dry cloth dipped in some "rosin water" or "stain remover" to wipe the overflowed part to clean the residual glue.

6. It can be used directly after laying

Most of the plastic flooring used is water-based glue or pressure-sensitive glue. This glue has a characteristic that the more you step on it, the more firmly it will stick. Therefore, using it directly after laying it will not only not damage the construction effect, but also make the floor more firmly fixed!