Shangban Central Primary School-Daily Precautions for Anti-static Flooring

Shangban Central Primary School in Longwen District, Zhangzhou City is a provincial rural demonstration school and a municipal civilized school. It is located in the eastern suburbs of Zhangzhou. The school’s goal is "to face the whole, to face development, and to have their own strengths. Shangban Central Primary School in Longwen District, Zhangzhou City, is a provincial rural demonstration school and a municipal civilized school. Located about 1 kilometer away from Zhangtai Highway on National Highway 319 in the eastern suburbs of Zhangzhou, the campus covers an area of more than 11,300 square meters. Limei Floor Products (Guangdong) Co., Ltd. was fortunate to participate in the material supply and supporting construction of the anti-static floor project of Shangban Primary School in Zhangzhou, Fujian Province during the summer vacation of 2022. We will strictly follow the requirements of the general contractor and strive to complete and deliver it as soon as possible. **The editor will teach you how to take daily precautions for static floors

1. Use environment: The room environment control requirements for laying anti-static flooring are temperature: 15℃~35℃, relative humidity: 45%RH~75%RH;

2. Decorative floor:

2.1 It is forbidden to use sharp tools or sharp-edged tools to directly construct and operate on the decorative surface of the raised floor to prevent damage to the anti-static performance and aesthetics of the decorative surface;

2.2 During use, personnel are prohibited from jumping directly from a high place onto the anti-static floor, and from moving items roughly to avoid damaging the floor;

2.3 When moving objects on the raised floor, it is prohibited to push objects directly on the floor surface, which may cause direct friction between the objects and the ground and scratch the floor surface.

2.4 When moving items, use a cart with rubber wheels or place an isolation mat between the outline of the object and the floor to prevent damage to the floor surface;

2.5 When placing heavy objects on the anti-static movable board, they should be placed steadily to avoid damaging the anti-static floor;

2.6 When maintaining the equipment under the floor, use the floor suction device to install the floor. When removing and installing the floor, be careful to avoid damaging the anti-static floor.

2.7 During use, you can use a clean mop and rag to keep the board surface clean. Be careful not to spill a large amount of water, detergent and other liquids on the floor, so as not to affect the service life of the anti-static floor and the normal operation of the circuits and equipment under the anti-static floor;

3. Bare floors and ventilated floors

3.1 The anti-static spray-coated layer of the raised floor should be prevented from being scratched during use. If scratches are found, they should be repaired with gray paint to ensure the integrity of the coating.

3.2 Prevent small objects from falling into the ventilation holes of the ventilation floor (such as coins, keys, paper clips, pins, etc.) to avoid damaging ventilation regulators and other equipment.